Différences

Ci-dessous, les différences entre deux révisions de la page.

--- en:connect_crop_holes_ab [2024/03/20 14:24] – [Manual AB hole area] sca
+++ en:connect_crop_holes_ab [2024/03/27 11:03] (Version actuelle) – sca
@@ Ligne 1: / Ligne 1: @@
-FIXME **Cette page n'est pas encore traduite entièrement. Merci de terminer la traduction**\\ //(supprimez ce paragraphe une fois la traduction terminée)//
-====== Add a relief zone in AB ======
+====== Connect crop holes AB ======
@@ Ligne 46: / Ligne 46: @@
 How it works: select the end of a row, then the end of a second row, and draw a hole area between the two ends.
-==== Hole area curves ====
+==== Crop hole zone curves ====
-The Automatic AB hole area option is triggered by activating the **Rounded load-shedding zones** parameter, then clicking on the **LINK** button.
+The Automatic AB hole area option is triggered by activating the **Rounded crop hole zones** parameter, then clicking on the **LINK** button.
-The option works either automatically or manually, depending on the **Auto AB load-shedding zone connection** parameter.
+The option works either automatically or manually, depending on the **Auto AB crop hole zone connection** parameter.
-If the rows are not perfectly aligned, the creation of curved holes areas prevents the robot from entering or leaving a hole area with a great an angle, by smoothing the curve of the trajectory.
+If the rows are not perfectly aligned, the creation of curved crop hole zone prevents the robot from entering or leaving a hole area with a great an angle, by smoothing the curve of the trajectory.
 ==== Hole area deletion ====