Différences

Ci-dessous, les différences entre deux révisions de la page.

--- en:settings [2024/01/05 14:46] – créée sca
+++ en:settings [2024/03/27 10:53] (Version actuelle) – sca
@@ Ligne 1: / Ligne 1: @@
-FIXME **Cette page n'est pas encore traduite entièrement. Merci de terminer la traduction**\\ //(supprimez ce paragraphe une fois la traduction terminée)//
+====== Settings ======
-====== Import a map ======
 ===== Icon =====
@@ Ligne 17: / Ligne 15: @@
       * For the moment, the only languages available are English and French.
     * Selects the opening mode of the [[helpception|integrated help]] : in a new tab / in a window integrated into Easymapping
+    * Accesses the application's expert mode. Please note that expert mode provides access to so-called expert options and expert parameters. Using or modifying them without knowing how it works may cause malfunctions and/or errors in map creation. When Expert mode is activated, unlocked tools and functions will be highlighted in orange.
-{{ :action_toolbar:settings_app_parameters.png?400 |}}
+{{:en:settings2.png?400|}}
   * **Map settings**
-    * The height of the antenna when recording GPS points.
+    * The export version of Geofencing
-      * This height must be entered if the map is recorded by placing the GPS on a seed drill, for example. The robot will use this information to calculate a correction in the event of a slope in the plot and adapt its trajectory.
+      * This parameter limits the number of map points exported for the geofencing. Please note that the geofencing export version must correspond to the software version of the robot concerned.
-    * The temporal criterion for rank segmentation
+    * The temporal criterion for rank segmentation (can only be modified in expert mode)
       * This parameter allows two points to be considered as belonging to different ranks if they were taken more than X seconds apart.
       * It is used in particular by the [[open_file|card import]] or the [[simplify|simplification]]
-{{ :action_toolbar:settings_map_parameters.png?400 |}}
+{{:en:settings_map_parameters2.png?400|}}
 To validate parameter changes, click on **SET**. Exiting the option in any other way does not save the modified parameters.