Shift trajectory

This option allows you to shift the rows frontally or laterally according to the antenna configuration when recording points.

The option is only available when at least one map is loaded in the application.

When the option is started, a window opens allowing you to :

1. Select the project to be shifted
2. Enter offset parameters
   • The front offset of the antenna in relation to the row (positive if the GPS is at the front of the seeder).
   • The lateral offset of the antenna in relation to the row (positive if the GPS is located on the right of the seeder).
   • Whether or not the entire map is offset to the same side.
     • If this parameter is enabled, the offset will be effective relative to the map background and not to the row.
     • Otherwise, each row will be shifted so as to create a map corresponding to the GPS track if it had been placed at the level of the sowing heads.

To illustrate the differences in shift depending on the “shift all map to the same side” parameter, here's a comparison:

1. Original map
2. Map with 20cm lateral offset, no same-side offset
3. Map with 20cm lateral offset, same-side offset

The differences between maps 1 and 3 can be seen in the white object.

The D keyboard shortcut also starts the tool.